Grab Bucket, Rock Grab or Demolition Grab: which one suits your job?
Short answer: pick a Grab Bucket if you’re mostly digging, picking up and loading loose or mixed material. Pick a Rock Grab if you’re placing and moving rock and boulders. Pick a Demolition Grab if you’re pulling down structures and sorting the waste. Then match the grab to your excavator’s weight class.
What does a Grab Bucket do?
A Grab Bucket digs, picks up, holds and loads material that a normal bucket would spill or push around. Think site clean-ups, loading trucks with mixed spoil and handling awkward loose material.
Macworks Grab Buckets are heavy duty and fixed (they don’t rotate). They come with a removable, bolt-on hanger plate and suit most excavators from 1.5t.
What is a Rock Grab used for?
A Rock Grab is built for picking and placing rock. It’s the tool for rock walls, riprap, retaining and coastal or riverbank protection, where you need to grip a boulder and set it exactly where it goes. It can also be used for logs and tree work, and pitching posts.
We have Fixed-Rotating and Non-Rotating Rock Grabs. A Fixed-Rotating Rock Grab lets you turn the rock to fit without moving the machine. Both have a removable, bolt-on hanger plate and suit most excavators from 1.5t.
What is a Demolition Grab?
A Demolition Grab pulls structures apart and sorts the debris into piles (timber, steel, concrete) so it can be recycled or carted away. Demolition, Sorting and Cage Grabs are the same attachment.
Macworks Rotating Demolition Grabs run a Parker hydraulic motor and suit most excavators from 1.5t.
Which grab do I need for my job?

If two rows from the table above sound like you, go with the job you do most often. A grab that suits 80% of your work beats one that does everything badly.
What size grab suits my excavator?
Size the grab to your excavator’s weight class, not the bucket you run now. Excavator weights are nominal, so a grab will often suit machines either side of its class. Too big and you’ll overload the machine. Too small and you’ll wear it out and slow the job down. You’ll also need the right hitch or pin set-up for your machine.

Do I need a Rotating Grab?
Rotation lets you turn the load without moving the tracks or the boom. That matters when you’re placing rock or sorting debris in tight spaces. Our Demolition Grabs rotate, and our Rock Grabs come in Fixed-Rotating and Non-Rotating versions. Our Grab Buckets are fixed and don’t rotate.
A rotating tool needs a minimum of 4 hydraulic lines (ports) to run the rotator as well as the jaws, so check your machine’s auxiliary hydraulics before you buy.
What should I tell you before I buy a grab?
Four things get you a straight answer quickly:
- Your excavator make and model
- Your hitch type: manual or quick hitch and pin details
- The main job the grab will do
- Whether you have the auxiliary hydraulics to run the tool
Talk to Macworks
Not sure which one fits? Call 0800 MACWORKS (0800 622 967), email sales@macworks.nz, or browse our grabs and grapples range. You can also see us at 102 Langley Road, Wiri.
Before you swap attachments, check the pin is in and the hitch is locked – WorkSafe’s guide to using quick hitches safely covers the basics.
FAQ
What’s the difference between a Grab Bucket and a Rock Grab?
A Grab Bucket is for digging, picking up and loading loose or mixed material. It’s fixed and doesn’t rotate. A Rock Grab is for gripping and placing individual rocks and boulders, and comes in Fixed-Rotating and Non-Rotating versions.
Can I use a Rock Grab for demolition?
It’s better to use a Demolition Grab, which is designed to pull structures apart and sort the debris. Choose the grab for the job you do most often.
What size excavator does a Macworks Grab Bucket suit?
Macworks Grab Buckets suit excavators from 1 to 45 t.
What excavator sizes do Macworks Demolition Grabs suit?
Macworks Rotating Demolition Grabs suit excavators from 1.5 to 40t.
What do I need to run a Rotating Grab?
A minimum of 4 hydraulic lines (ports) on your machine to run the rotator and the jaws.
Does Macworks sell grabs?
Yes. Macworks sells excavator attachments. Call 0800 MACWORKS (0800 622 967) to talk about the right grab for your machine.




